This program is subject to modification
Chair: Michel Coret
09:00 – 09:40 PIERRON Fabrice
Next generation of camera-based high strain rate material tests: the “IB” series
09:40 – 10:00 MOHAMED BARKAT Kadidja
Optimizing camera position for the modal analysis of a 3D structure
10:00 – 10:20 VINEL Adrien
Towards spatially resolved kinematic and temperature measurements in high strain-rate experiments
Chair: Rafael Estevez
11:15 – 11:55 BLUG Andreas
Combining GPU-based full-field and strain-controlled 2D-DIC for simplified crack growth experiments
11:55 – 12:15 SEGHIR Rian
Dynamic crack instabilities: an image-based perspective
12:15 – 12:35 LATTANZI Attilio
On the accuracy of dynamic shear ruptures measurements obtained with ultrahigh-speed Digital Image Correlation
12:35 – 12:55 AHMAD Waqas
Use of discontinuity functions for damage and crack tip detection in DIC
REU Phillip
DIC Challenge 2.0: Measuring Spatial Resolution of 2D-DIC Algorithms
AHMAD Waqas
Preliminary results of stereo-DIC challenge
TUCKER Victoria
Interlaboratory Round Robin Study of Errors and Best Practices for Scanning Electron Microscope Digital Image Correlation
Chair: Julien Réthoré
09:00 – 09:40 RUBINO Vito
Recent advances in capturing the behavior of dynamic shear cracks using ultrahigh-speed digital image correlations
09:40 – 10:00 SALETTI Dominique
MHz X-ray imaging of multi-fracturing processes in geomaterials
10:00 – 10:20 POULIQUEN Antoine
Quantitative imaging applied to high-speed machining: observations on the influence of the microstructure on the orthogonal micro-cutting of a titanium alloy (Ti555-3)
10:20 – 10:40 KAMASAMUDRAM Vasudevan
Using DIC data to determine the appropriate material behavior during the propagation of a Transonic crack in an elastomer
Chair: Brian Bay
11:15 – 11:55 DISNEY Catherine
Collagen Fibre Kinematics Within the Intervertebral Disc from Microstructure-Guided Digital Volume Correlation
11:55 – 12:15 ROUX Stéphane
Accessing 1-10 Hz 3D Vibration Modes with a CT-Scanner
12:15 – 12:35 SHAFIEI DIZAJI Mehrdad
Fusion of Computer Vision-Based Sensing and Topology Optimization Using 3D-Digital Image Correlation to Identify 3D Geometry of Structural Damage
12:35 – 12:55 KURTZ Samuel
3D Dynamic Displacement Full-Field Measurement by Optical Slicing Tomography and Digital Volume Correlation in gelatin samples: Data for Analysis by (Magnetic Resonance) Elastography
14:30 – 14:50 PINTER Pascal
Digital volume correlation for validation of mechanical models
14:50 – 15:10 FRAGNAUD Cédric
Automatic calibration of X-CT scanner parameters from few projections
15:10 – 15:30 KRAMER Sharlotte
Microstructural Effects on Local and Global Mechanical Responses of Foams
15:30 – 15:50 CALMETTES Lucie
3D metrological shape measurements from X-ray radiographs
15:50 – 16:10 ZOU Xiang
Self-adaptive digital volume correlation for accurate internal deformation measurements
Chair: Jean-Charles Passieux
14:30 – 14:50 NEGGERS Jan
On a non-linear scattered to gridded interpolator for DIC on point clouds
14:50 – 15:10 CHABIB A
Pixel-wise full-field strain measurements for analysis of strain heterogeneity
15:10 – 15:30 BLANC Nicolas
Proper Orthogonal Decomposition to study flow instabilities in TIG weld pool
15:30 – 15:50 BOUKHTACHE Seyfeddine
A lightweight convolutional neural network for full-field displacement measurement
15:50 – 16:10 PAN Bing
Mirror-Assisted Panoramic Digital Image Correlation: methods and applications
Chair: Fabrice Pierron
14:30 – 14:50 HEINZMANN Raphael
High speed DIC and Acoustic Emission on intermittent cracking
14:50 – 15:10 BOUBANGA TOMBET Stéphane
Full field vibration measurements on a cantilever beam under impact using visible and infrared deflectometry
15:10 – 15:30 LEFEBVRE Félix
Assessment of mechanical tests to characterize 3D kinematic behavior of running sport shoes
15:10 – 15:30 FAHEM Ali
Evaluate Bi-modulus Properties of Engineering Materials Using Full-field Dynamic Measurement
15:50 – 16:10 JANNOTTI Phillip
Instrumented Taylor Impact Testing
Chair: Mark Iadicola
16:45 – 17:05 KURSUN Elif Cansu
Three-dimensional digital image correlation for microscale strain field measurements using imprint lithography patterns
17:05 – 17:25 FAYAD Samuel
A Gradient-based Weighting Approach to Minimize Pattern-Induced Bias
17:25 – 17:45 HOKKA Mikko
Virtual Mechanics Laboratory for Engineering Education
Chair: Stéphane ROUX
16:45 – 17:05 ROUWANE Ali
A new numerical scheme for the measurement of strain fields in cellular microstructures
17:05 – 17:25 BLAYSAT Benoit
Localized Spectrum Analysis: extension to 3D measurements
17:25 – 17:45 PESHAVE Amar
A methodology to update finite element boundary conditions in a test specimen under a heterogeneous strain state based on DIC measurements
17:45 – 18:05 BAUDOIN Pierre
Large-scale industrial applications of Global FE-DIC: the challenges of self-calibration on the Ariane 5 Galileo dispenser
Chair: Phil Reu
16:45 – 17:05 NOVAK Josip
Practical Optimization of DIC Speckle Patterns for Mechanical Testing of Highly Deformable Materials in the Quasi-static and Dynamic Regime
17:05 – 17:25 LECOMTE-GROSBRAS Pauline
Full field measurement method coupling PTV and DIC methods for large strain testing
17:25 – 17:45 ROSSI Marco
On the stress reconstruction in thin sheets subjected to large deformation starting from stereo-DIC data
17:45 – 18:05 FLASCHEL Moritz
Unsupervised discovery of interpretable hyperelastic constitutive laws
Chair: Rian Seghir
09:00 – 09:40 BODELOT Laurence
“In-situ full-field measurements of strain and temperature at small scales: a perspective in sensor characterization and design”
09:40 – 10:00 HAMADOUCHE Ines
High temperature digital image correlation using brightness and contrast corrections
10:00 – 10:20 BERCELLI Lorenzo
Infrared thermography applied to the study of the effect of surface roughness on high cycle fatigue of Wire and Arc Additively Manufactured samples
10:20 – 10:40 LUONG Phuong
Is-it possible to measure accurate strains field by 2D DIC methods at high temperature ?
Chair: Benoit Blaysat
11:15 – 11:55 HOEFNAGELS Johan
Advancement of Integrated Digital Image Correlation, Integrated Digital Height Correlation, and Mechanical Shape Correlation – with new examples
11:55 – 12:15 BADULESCU Claudiu
Characterization of failure mechanisms in a FSW joint by using the Localized Spectrum Analysis, Acoustic Emission and X-ray microtomography
12:15 – 12:35 POWELL Louise
A Non-Intrusive Fluorescent Pattern Lattice for Internal Microscale Strain Measurements Using Digital Image Correlation
12:35 – 12:55 AMIOT Fabien
Grid nano-indentation as full-field measurements
Chair: Laurence Bodelot
14:30 – 14:50 BERNY Myriam
Spatiotemporal regularization for FE-based stereocorrelation: Application to high temperature tests
14:50 – 15:10 JONES Amanda
Simultaneous Full-field Strains and Temperatures for Large Deformation Plasticity
15:10 – 15:30 AYADI Abderrahmane
Assessment of heat-induced optical distortions on the accuracy of stereo-DIC measurements within the range of HIPS thermoforming temperatures
15:30 – 15:50 ARCHER Thibaut
Benefits of global digital image correlation with gray level corrections during very high temperature tests
15:50 – 16:10 KLEIN Markus
Combination of 3D DIC and Thermography measurements and applications
Chair: François Hild
14:30 – 14:50 BARRIERE Ludovic
Contributions of augmented simulation to identification of material parameters: application to lattice structures
14:50 – 15:10 PASSIEUX Jean-Charles
Improving material parameter identification using spline FFD-based optimization of specimen shape
15:10 – 15:30 TAYEB Adel
Identification of constitutive parameters of elastomers from one heterogeneous test
15:30 – 15:50 HENRIQUES João
Identification of orthotropic elastic properties of wood by a synthetic image approach based on digital image correlation
15:50 – 16:10 JONES Elizabeth
Multi-Surface DIC for Path-Integrated X-Ray Images
Chair: Marc Francois
14:30 – 14:50 GHANEM Nihal
2D strain field measurement in glulam elements during moisture absorption
14:50 – 15:10 AL NEMER Rana
Detection of interface in bi-phasic flow and full-field measure of strain localization
15:10 – 15:30 STAVROPOULOU Eleni
Multimodal hydromechanical analysis of swelling rocks with DVC
15:30 – 15:50 ABDALLAH Youssouf
Deformation band identification on carbonate rocks
15:50 – 16:10 TOOME Flávio
Non-destrutctive test using non-contact method through digital image correlation in foundation concrete
Chair: Andreas Blug
16:45 – 17:05 MAC DONALD Kimberley
Image Correlation in Fracture Tests to Determine Cohesive Parameters
17:05 – 17:25 ESTEVEZ Rafael
Identification of toughness, strength and cohesive model from a V-notch: coupled criterion analysis and cohesive modelling
17:25 – 17:45 LANGLOIS Raphaël
Crack meshing strategy in a Global DIC framework
17:45 – 18:05 FELD-PAYET Sylvia
An empirical criterion for actual crack tip detection
18:05 – 18:25 CARROLL Jay
Interesting Material Phenomena in Fe-Co-2V Soft Ferromagnetic Alloy
16:45 – 17:05 GUIMARAES OLIVEIRA Miguel
Uncertainty quantification in the volume reconstruction from stereo-DIC measurements using virtual experiments
17:05 – 17:25 HILD François
Displacement Uncertainty Quantifications in T3-Stereocorrelation
17:25 – 17:45 BHATTACHARYYA Mainak
Uncertainty quantification for parametric identification: a Bayesian approach
17:45 – 18:05 LIAN Hui
Development of a numerical tool for characterizing the metrological performance of fringe projection systems